Product ID:DP48LF EPOXY PRIMER WHITE NON-CHROME
MSDS Date:09/23/1996
FSC:8010
NIIN:00F050513
Status Code:A
MSDS Number: CJYJY

PPG INDUSTRIES

4325 ROSANNA DR
ALLISON PARK, PA 15101

Emergency Phone: 304-843-1300

Info Phone: 304-843-1300

Cage: DO540

PPG INDUSTRIES

9 ALLISON PARK, PA 15101

Telephone: 304-843-1300

Cage: DO540

METHYL ISOBUTYL KETONE

CAS: 108-10-1

RTECS: SA9275000

OSHA PEL 410 MG/M3;100 PPM

ACGIH TLV: 205 MG/M3;50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL see Table Z-2

ACGIH TLV: 188 MG/M3;50 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

OSHA PEL 465 MG/M3;100 PPM

ACGIH TLV: 233 MG/M3;50 PPM

2-BUTOXYETHANOL

CAS: 111-76-2

RTECS: KJ8575000

OSHA PEL 240 MG/M3;50 PPM

ACGIH TLV: 121 MG/M3;25 PPM

NATURAL CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

XYLENE

CAS: 1330-20-7

RTECS: ZE2100000

ACGIH TLV: 434 MG/M3;100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

EPOXY RESIN

CAS: 25068-38-6

RTECS: CE6880000

VINYL RESIN

CAS: 25086-48-0

NAPHTHA

CAS: 64742-95-6

RTECS: WF3400000

BARIUM SULFATE

CAS: 7727-43-7

RTECS: CR0600000

OSHA PEL 15 MG/M3

ACGIH TLV: 10 MG/M3

1,2,4-TRIMETHYLBENZENE

CAS: 95-63-6

RTECS: DC3325000

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL/FATAL IF SWALLOWED, HARMFUL IF
ABSORBED THROUGH THE SKIN. PROLONGED/REPEATED EXPOSURE MAY CAUSE
ALLERGIC REACTIONS. EYES: SEVERE IRRITATION. INHALATION:
IRRITATION TO NOSE & THROAT. REPEATED EXPOSURE TO VAPOR
CONCENTRATIONS MAY CAUSE IRRITATION OF THE RESPIRATORY SYSTEM &
PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE. ETHYLENE GLYCOL
ETHER/ACETATE: MAY CAUSE ADVERSE EFFECTS ON THE KIDNEYS, LIVE R,
BLOOD & BLOOD FORMING TISSUE. INTENTIONAL MISUSE BY DELIBERATELY
CONCENTRATING & INHALING THE CONTENTS CAN BE HARMFUL/FATAL.
Effects of Overexposure:IRRITATION, EYE WATERING, HEADACHES, NAUSEA,
DIZZINESS, LOSS OF COORDINATION

First Aid:INGESTION: DON'T INDUCE VOMITING. GENTLY WIPE OUT INSIDE OF
MOUTH TO REMOVE ANY RESIDUE MATERIAL. EYES: REMOVE CONTACT LENSES &
FLUSH IMMEDIATELY W/GENTLY STREAM OF LUKEWARM WATER FOR 15 MINS.
SKIN: FLUSH IMMEDIATELY W/PLENTY OF WATER FOR 15 MINS, FOLLOWED
BY WASHING W/ SOAP & WATER. INHALATION: REMOVE TO FRESH AIR. GIVE
CPR IF NEEDED. INGESTION: CONTACT A POISON CONTROL CENTER & HAVE
MATERIAL S AFETY DATA SHEET INFORMATION AVAILABLE. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:=26.7C, 80.F
Lower Limits:1.2
Extinguishing Media:CO2, DRY CHEMICAL/UNIVERSAL AQUEOUS FILM FORMING
FOAM.
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. WATER SPRAY
MAY BE USED TO COOL CLOSED CONTAINERS. IF WATER IS USED, FOG
NOZZLES ARE PREFERABLE. WEAR SELF CONTAINED BREATHING APPARATUS &
PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:KEEP PRODUCT AWAY FROM ALL IGNITION
SOURCES. VAPORS CAN TRAVEL TO A SOURCE OF IGNITION & FLASH BACK.
DON'T SMOKE WHILE USING THIS PRODUCT. KEEP CONTAINERS TIGHTLY
CLOSED WHEN NOT IN USE. CLOSED CONTA INERS MAY EXPLODE WHEN
OVERHEATED. DON'T APPLY TO HOT SURFACES. TOXIC GASES MAY FORM WHEN
IN CONTACT W/EXTREME HEAT.

Spill Release Procedures:USE MAXIMUM VENTILATION. ONLY PERSONNEL
EQUIPPED W/PROPER RESPIRATORY & SKIN/EYE PROTECTION, PERMITTED.
REMOVE IGNITION SOURCES. TAKE UP W/SAND/VERMICULITE/OTHER
NONCOMBUSTIBLE ABSORBENT MATERIAL & PL ACE IN CLEAN EMPTY
CONTAINERS FOR DISPOSAL.

Handling and Storage Precautions:GROUND CONTAINER WHEN POURING. AVOID
FREE FALL OF LIQUIDS IN EXCESS OF A FEW INCHES. DON'T STORE >120F.
STORE LARGE QUANTITIES IN BUILDINGS DESIGNED & PROTECTED FOR
STORAGE OF NFPA CLASS C FLAMMABLE L IQUIDS.
Other Precautions:VAPORS MAY COLLECT IN LOW AREAS. IF MATERIAL IS PART
OF A MULTIPLE COMPONENT SYSTEM, READ THE MATERIAL SAFETY DATA SHEET
FOR THE OTHER COMPONENT/COMPONENTS BEFORE BLENDING AS THE RESULTING
MIXTURE MAY HAVE THE HAZARDS OF ALL OF ITS PARTS.

Respiratory Protection:USE NIOSH/MSHA APPROVED AIR PURIFYING
W/APPROPRIATE CHEMICAL CARTRIDGES/A POSITIVE-PRESSURE AIR SUPPLIED
RESPIRATOR.
Ventilation:GENERAL DILUTION/LOCAL EXHAUST TO KEEP CONCENTRATION BELOW
THE EXPOSURE LIMITS, THE LEL BELOW THE STATED LIMIT & TO REMOVE
PRODUCTS DURING WELDING/FLAME CUTTING
Protective Gloves:NITRILE RUBBER/LATEX, NEOPRENE RUBBER
Eye Protection:CHEMICAL SPLASH GOGGLES/FULL FACE SHIELD
Other Protective Equipment:IMPERMEABLE APRON, PROTECTIVE CLOTHING
Supplemental Safety and Health

Boiling Pt:B.P. Text:230-381F
Vapor Pres:7.5
Vapor Density:>1
Spec Gravity:1.42
Evaporation Rate & Reference:(BU OAC =100): 79
Solubility in Water:4.5
Appearance and Odor:VISCOUS LIQUID W/CHARACTERISTIC ODOR OF THE
SOLVENTS LISTED.
Percent Volatiles by Volume:61.12

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS/STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES, ELECTRICAL
EQUIPMENT & OTHER IGNITION SOURCES. TEMP >120F.
Hazardous Decomposition Products:HEATED, WELDING, BRAZING/FLAME
CUTTING: CO, CO2, OXIDES OF DERLUM, OXIDES OF SULFUR, OXIDES OF
PHOSPHORUS

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED/DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.